Printing

Checking Your Environment

First, check your environment.

• AirPrint Operation Environment
  Mac running the latest version of OS

• Requirement
  The Mac and the printer must be connected by one of the following methods:

  • Connected to the same network over a LAN
  • Connected directly without wireless router (Direct Connection)
  • Connected by USB

Print from a Mac

1. Check that printer is turned on

   Note

   • If Auto power on is enabled, printer automatically turns itself on when receiving a print job.

2. Load paper in printer

3. Select paper size and paper type from printer

   Register the set paper size and paper type on the printer operation panel.
   For instructions, see "Paper Settings."

4. Start printing from your application software

   The Print dialog opens.

5. Select printer

   Select your model from the Printer list in the Print dialog.

   

6. Check print settings

   Set items such as Paper Size to the appropriate size, as well as Feed From and Media Type from Media & Quality.
   Set Double-sided to Off if you are not printing on both sides of the paper.

   

   Important

   • An error may occur if the paper size set in the print dialog is different from the paper size registered on the printer. Select the correct items on the print dialog and the printer that correspond to the paper being printed.
   • If printing in A4, A5, JIS B5, Executive, or US Letter, set the desired feed position (Main Tray, or Rear Tray) from Feed From of the print dialog. If Auto Select is selected in Feed From, the feed position differs depending on Media Type. If Media Type is set to something other than plain paper, it cannot be fed from the cassette (main tray).
   • If printing paper such as photo paper and postcards that cannot be printed on both sides, set Double-sided to Off.

   Note

   • Use the Print dialog to set general print settings such as the layout and the print sequence.
     For information about print settings, refer to macOS help.

7. Click Print

   The printer prints according to the specified settings.

Important

• If you are performing large-format printing, make sure that there is plenty of remaining ink.
• If you set a custom paper size in Paper Size and set it to a length longer than the specified length, the data will be printed with the "Media Type: Plain Paper, Print Quality: Standard" setting.

Note

• It can take the Wi-Fi a few minutes to get connected after the printer turns on. Print after checking that the printer is connected to the network.
• You cannot print if Bonjour settings of printer are disabled. Check LAN settings of printer and enable Bonjour settings.
• Refer to "Cannot Print Using AirPrint" for printing problems.
• The display of the settings screen may differ depending on the application software you are using.

Printing of Envelopes

For printing on the envelope from Mac, refer to the following.

Print result image	Orientation of print data	Orientation of loading envelope
	The print data is rotated by 180 degrees against the print result image.	Load the envelope in vertically with the address side facing up so that the folded flap of the envelope will be faced down on the right side.